Numatic Commercial Vacuum Cleaners

Industrial 4 in 1 Extraction - CTD900-2Kit A41A

Order codes
833069CTD900-2 Blue 240V + Kit A41AWhen describing the Cleantec 900 we have called it the “truck-type” machine because it is built like a truck yet is as easy to handle as any of the Cleantec range.

The all Structofoam construction leaves little to be desired, being rugged yet light in weight, and with oversized wheels and castors you can move it easily over all surfaces, or up and down stairways. The 900 is our largest machine to incorporate the compact “tank within a tank” design, allowing for use in confined areas.

The 900’s come in two models, one-motored or two-motored, both incorporating our TwinFlo’ bypass motors and integrated Powerflo’ pump system. The pump system injects the cleaning solution deep into the carpets in a continuous deep cleaning cycle and these bigger machines will cover an area more than three times that of our smaller machines, without the need for emptying. The unique tipper system incorporated within the chassis design allows for the machine to be emptied in floor drains or WC’s where available, and this is especially important in office blocks and high rise apartment blocks.

The full accessory kit provides for both carpet or upholstery cleaning, with optional kits and accessories available for hard floor cleaning and wet and dry pick-up.

Numatic Commercial Vacuum Cleaner PVT-220A Trolley Vacuum Hoover
Product code 838968

This is a completely new approach to improved cleaning for both you and your team. The provision of our
“on-board” drop-on/lift-off caddy gives you somewhere to keep all those essential items such as spray cleaner, dusters and cloths... always needed and always there!

The ProVac range is a perfect example of combining the very best innovation into a single product range to produce exceptional results in many more ways than one could imagine. The enhanced power and performance from our TwinFlo vacuum technology are fully complemented by a combination of our new NST Sound Reduction and Autosave energy conservation systems.

HepaFlo filtration not only raises performance standards but provides for clean and convenient emptying when full.

The AutoSave system automatically starts in the economy, energy conservation mode, immediately reducing your power requirements by half, exactly the same as switching off 10 x 60W light bulbs! If, at any time, more power is needed, one push of the Hi switch gives you literally twice as much which can sometimes be almost too much but fear not, a second push of the switch and you will automatically return to economy again. Simple green technology and yours to command.
A face is supplied separately for optional user application.

Motor 1200 / 600 W
Power 230V AC 50/60Hz
Airflow 42 L/sec
Suction 2500 / 1500 mm
Capacity 9 L
Range 31.8 m
Weight 8.5 kg
Dimensions 355 x 355 x 615

Code reference PVT220A

Advanced Filtration & Cyclonic - HZDQ750-2Kit BB20

Order codes
833035HZDQ750-2 Yellow 240V + Kit BB20The 750 series of “H” specification machines has been specifically designed to meet the requirements of industries where it is necessary to remove dust that
could constitute a health hazard and, as such, the total design concept has been to provide a choice of machines that meet an absolute 99.97% filtration efficiency, complete with practical engineering features that ensure that they can be easily and efficiently used and maintained on a day to day basis.

The power head is of all-steel construction and is available in a choice of one or two motored construction. Power and performance are to full TwinFlo’ standards and plugged easily replaceable cable systems are a standard fitment.

The HEPA filter units are securely mounted on their steel module with separate primary pre-filter mounted within the main container and the machines are designed to use our giant Microflo’ dust bags to ensure easy, clean and safe emptying.

All machines are supplied with comprehensive accessory kits.

It is important that in applications where HZ machines are used that full consideration is given to the procedure of use, the appropriate clothing and protection that may be required by the operator

Advanced Filtration & Cyclonic - HZQ750-2Kit BB20

Order codes
833029HZQ750-2 Yellow 240V + Kit BB20The 750 series of “H” specification machines has been specifically designed to meet the requirements of industries where it is necessary to remove dust that
could constitute a health hazard and, as such, the total design concept has been to provide a choice of machines that meet an absolute 99.97% filtration efficiency, complete with practical engineering features that ensure that they can be easily and efficiently used and maintained on a day to day basis.

The power head is of all-steel construction and is available in a choice of one or two motored construction. Power and performance are to full TwinFlo’ standards and plugged easily replaceable cable systems are a standard fitment.

The HEPA filter units are securely mounted on their steel module with separate primary pre-filter mounted within the main container and the machines are designed to use our giant HepaFlo dust bags to ensure easy, clean and safe emptying.

All machines are supplied with comprehensive accessory kits.

It is important that in applications where HZ machines are used that full consideration is given to the procedure of use, the appropriate clothing and protection that may be required by the operator.

Small ‘HZ’ machine, similar spec. to the HZ200-2 but with 10L polypropylene dust container. Standard Kit-BB17 / 18.

Specifications
Motor Twinflo
Power 1200
Airflow 45L/sec
Suction 2600mm
Capacity 15L
Cleaning Range 26.8m
Weight 10.4kg
Size 355x355x570mm

Code reference HZQ 370 2

Small ‘HZ’ machine, similar spec. to the HZ200-2 but with 10L steel dust container. Standard Kit-BB17 / 18.

Specifications
Motor Twinflo
Power 230V AV 50/60Hz
Motor Power 1200W
Airflow 45L/sec
Suction 2600mm
Capacity 10L
Cleaning Range 26.8m
Weight 10.3kg
Size 340x340x470mm

Smallest machine in our ‘HZ’ (Hazardous dust) range of dry vacs. For use where it is necessary to vacuum dusts that could constitute a health hazard*. The 1200W all-steel low noise power head ( with replaceable plugged cable ) and HEPA Filtration Module, sit on a polypropylene container (of 9L capacity) which has a primary pre-filter and Microflo’ dust bag, in total providing up to 99.997% filter efficiency.
Standard Kit-BB17 / 18.
*When using an ‘HZ’ machine to pick up health endangering dusts, it is important that consideration is given to appropriate clothing and protection for the operator.

Specifications
Motor Twinflo
Power 230V AV 50/60Hz
Motor Power 1200W
Airflow 45L/sec
Suction 2600mm
Capacity 9L
Cleaning Range 26.8m
Weight 10.1kg
Size 355x355x520mm

Large 80L capacity vac. Powerful dual two-stage motors (2400W) Structofoam head, cyclonic inlet and big shakeable filter system, stainless-steel container and heavy-duty transit chassis. This machine is capable of tackling a variety of tasks: from builders’ rubble - the cleaning of chicken sheds or textile mills. Standard Kit-BB5 with optional Kits-BB2 / BB10 / BB12 .

Specifications
Motor 2 x Twinflo
Power 230V AV 50/60Hz
Motor Power 2400W
Airflow 80L/sec
Suction 2500mm
Capacity 80L
Cleaning Range 26.8m
Weight 30.2kg
Size 560x660x1145mm

Large 80L capacity vac. Powerful dual two-stage motors (2400W) Structofoam head, cyclonic inlet and big shakeable filter system, stainless-steel container and heavy-duty transit chassis. This machine is capable of tackling a variety of tasks: from builders’ rubble - the cleaning of chicken sheds or textile mills. Standard Kit-BB5 with optional Kits-BB2 / BB10 / BB12 .

Specifications
Motor 2 x Twinflo
Power 230V AV 50/60Hz
Motor Power 2400W
Airflow 80L/sec
Suction 2500mm
Capacity 80L
Cleaning Range 26.8m
Weight 30.2kg
Size 560x660x1145mm

Industrial Dry Vacs - NTD750M-2Kit BB5

Order codes
838007NTD750-2 Microfilter Grey 240V + Kit BB5Although the performance standard of the NTD-750 is exceptionally high, there are applications such as the pharmaceutical industry where the dust being collected could constitute a health hazard.

To allow for these applications we have, by the simple addition of our HEPA filtration module, provided up to 99.97% filter efficiently but without detracting from the convenience and ease of use of this machine size.

The Structofoam, TwinFlo’ two-motored power head, the container and chassis all meet the full 750 specification in every detail and the accessory kit is to our full 38mm (1 1/2”) commercial standard.

The golden rule in the case of dusts that could be injurious to health is to be safe and select the NTD-750M series or, in the case of smaller
machines, select the MFQ-370 which is to the same high filtration standard.

Industrial Dry Vacs - NTD750C-2Kit BB5

Order codes
838008NTD750C-2 Cyclonic Grey 240V + Kit BB5The whole design concept, construction and performance of the NTD-750 is dedicated to producing a standard industrial vacuum cleaner that will provide totally reliable performance in all standard industrial applications. Be it boiler cleaning, floor cleaning, machine maintenance, high level cleaning, metalworking, dirt, dust or debris, it will take it all in its stride as standard.

The exclusive Structofoam power head incorporating two TwinFlo’ bypass motors provides exceptional performance and the Nucable replaceable cable system is standard, allowing quick cable replacement in the event of accidental damage.

Two large, standard filters ensure that what goes in stays in and, in addition, giant additional HepaFlo dust bags are available.

The standard container is all-steel, finished in Nutex, a specially formulated epoxy resin coating providing extreme durability and long service life. The container is mounted on, but easily removed from, our all-steel heavy-duty chassis equipped with large transit wheels.

The standard accessory kit is to a full 38mm (1 1/2”) specification.

Many of the NTD applications involve the collection of substantial volumes of various materials with a high content of low or sub micron particulate.

To upgrade operational performance in fine dust environments, an additional Cyclonic Separation Kit can be supplied fitted or retro-fitted to improve the function of the machine in these specialised circumstances.

Medium size ‘CT’ extraction cleaning system , utilising two CT570-size machines joined by a 10m ‘umbilical cord’. The slave unit contains 30L of cleaning solution which it pumps to the dual-motored extraction unit (with hose, tube set & pick-up tool connected), this having a dirty water capacity of 15L. Extraction performance with the ‘Widetrac’ twin-jet spray extraction nozzle gives 90%+ liquid recovery. For use around the larger commercial premises; offices, large restaurants, foyers, etc., anywhere with really large areas of carpeting to be cleaned. Standard Kit-A50 has both carpet and upholstery cleaning nozzles. Optional Kit-BB50 provides for wet or dry pick-up using the 570 extraction unit.

Specifications
Motor Power 2400W
Power 230V AC 50/60Hz
Airflow 80L/sec
Suction 2400mm
Capacity A=15L
B=30L
Cleaning Range 26.8m
Weight A=30.9Kg
B=12.5kg
Size A=415x415x630mm
B=415x415x630mm
Pressure 58/4psi/bar
Flow 2L/min

Industrial 4 in 1 Extraction - TPD570Kit A50

Order codes
838441TPD 570 + Kit A50The system is split into two parts:- the powered 30-litre solution bucket and the 15-litre twin motored extraction bucket. But being two parts they are easy to handle especially where dirty water must be disposed of in a sink or WC... you simply empty the bucket... and for the clean water you simply fill the bucket as required... never easier!

A twin 10-metre quick release solution and power cable (the umbilical we call it) joins the two together coupled with our deep clean extraction kit completes this truly versatile package.

Operation is simplicity itself, by virtue of the system being in two parts you position both units in the area to be cleaned, fill the solution tank, it then stays conveniently out of the way, you connect the extraction machine to the solution tank (the umbilical again), attach the kit and you are ready to go. A cleaning range of 26-metres after which you can move the solution unit on its castors and cover another 26- metres. Extraction performance gives you an amazing 90%+ liquid recovery substantially reducing drying time… this really is “Good News”!

During the cleaning cycle the extraction dirty water tank must be emptied once when full but, being so convenient, it takes no time at all. (For a larger extraction machine see information on the TP-930).

Big Machine Performance with Little Machine Convenience.

Medium size ‘CT’ extraction cleaning vac., with powerful 1200W two stage motor and super-tough Structofoam construction.(- with 3-year warranty ). Capacity: 23L-dry / 15L-wet / 10L-extraction chemicals. Standard Kit-A41A (with aluminium fishtail nozzle). Other options are Kits-A11 / A21A / A26A.

Specifications
Motor Twinflo
Power 230V AV 50/60Hz
Motor Power 1200W
Airflow 40L/sec
Suction 2500mm
Capacity Dry 23L
Capacity Wet 15L
Capacity Extraction 10L
Cleaning Range 26.8m
Weight 16.2kg
Size 415x415x645mm

Medium size ‘CT’ extraction cleaning vac., similar performance to the CT370-2, with a larger container – giving capacities of : 27L-dry / 20L-wet / 11L- extraction chemicals. A folding handle design allows easy movement when in use and compact storage. . Standard Kit-A40A. Other options are Kits-A11 / A21A / A26A.

Also available CTT 470-2 with transparent container.

Specifications
Motor Twinflo
Power 230V AV 50/60Hz
Airflow 40L/sec
Suction 2500mm
Capacity Dry 27L
Capacity Wet 20L
Capacity Extraction 11L
Cleaning Range 26.8m
Weight 12kg
Size 358x450x710mm

Large wet vac. General spec. as the WVD2000-2 model but with the addition of a fully integrated submersible pump system; allowing for continuous suction and pump-out facilities such required for: salvage work, flood damage, flat roofing, fire services and the like. Standard Kit-BB7.

Specifications
Motor 2xTwinflo
Power 230V AV 50/60Hz
Motor Power 2400W

Code reference WVD 2000 AP 2
Airflow 80L/sec
Suction 2500mm
Capacity Wet 70L
Pump AP=500W
Cleaning Range 26.8m
Weight 32.4kg
Size 640x530x970mm

Large wet vac. with dual motors(2400W) and fully automatic submersible pump – with its own hi/lo level float control. General spec.as the other WVD1800 models. Standard Kit-BB7. A machine for specialist operators requiring continuous collection and discharge of bulk liquids, such as: salvage work, flood damage, flat roofing, fire services and the like.

Specifications
Motor 2xTwinflo
Power 230V AV 50/60Hz
Motor Power 2400W
Airflow 80L/sec
Suction 2500mm
Capacity Wet 70L
Pump AP=500W
Cleaning Range 26.8m
Weight 35.0kg
Size 684x785x935mm

Industrial Wet Vacs - WVD1800PH-2Kit BB7

Order codes
835919WVD1800PH-2 Blue 240V + Kit BB7Where big machines with big capacities are specified you will undoubtedly also find that they are expected to do a lot of work.

The WVD-1800 is a classic in terms of construction and specification but in the PH (pump hose) model particular attention has been paid to filling and emptying features.

All machines incorporate our trash basket inlet filter system retaining larger debris and allowing the fitting of a powered “pump out” hose system simplifying and speeding up the emptying procedure.

The power head incorporates two TwinFlo’ 2-stage bypass motors providing excellent performance standards but when high power allows quick filling, so the pump out hose system assists in much improved and speedier emptying.

Accessories are to the full 38mm (11/2”) commercial standard including stainless steel tube sets and Structofoam wet pick-up nozzle.

Large wet vac. with dual motors(2400W), big 70L capacity and convenient dump hose for ease of emptying. Super-tough Structofoam container and power head. Standard Kit-BB7 contains stainless steel tubes and Structofoam wet pick-up nozzle. A big machine with a big capacity.

Specifications
Motor 2xTwinflo
Power 230V AV 50/60Hz
Motor Power 2400W
Airflow 80L/sec
Suction 2500mm
Capacity Wet 70L
Cleaning Range 26.8m
Weight 31.3kg
Size 684x785x935mm

Industrial Wet or Dry - WVD750T-2Kit BB8

Order codes
833039WVD750T-2 S/Steel 240V + Kit BB8For a number of traditional applications within the medical, healthcare, food and pharmaceutical industries stainless steel remains the standard that is in high demand.

The wet or dry 750 provides an absolutely superb standard with the extensive use of austenitic grade stainless steel (totally without iron content) in the
container, lower chassis and tube sets.

The power head is to the full Structofoam specification with Nucable plugged cable replacement facility and the two-motored TwinFlo’
specification is, without doubt, about as good as you can get.

The unique tipper chassis and big wheel construction ensure easy movement and emptying.

Accessories are to a full commercial 38mm (11/2”) standard with stainless steel tubes and Structofoam floor nozzles, in fact, everything that is needed for wet or dry operation.

Large commercial / industrial ‘WV’ vac. with dual two stage motors (2400W) giving 80L/sec airflow and a general spec. similar to the WV900-2, including the tipper system and excellent mobility. Standard Kit-BB8, optional Kit-BB7.

Specifications
Motor 2xTwinflo
Power 230V AV 50/60Hz
Motor Power 2400W
Airflow 80L/sec
Suction 2500mm
Capacity Dry 40L
Capacity Wet 32L
Cleaning Range 26.8m
Weight 25kg
Size 800x490x880mm

Large commercial Industrial WV vacuum similar to the WV570-2, but with greater capacity: 32L-wet / 40L-dry. Tipper system incorporated within the chassis design allows for the machine to be emptied in floor drains or WC’s where available.- A tough machine with good mobility, for use around the larger commercial premises; canteen, supermarket, workshop, warehouse, etc. Standard Kit-BB8, optional Kit-BB7.

Specifications
Motor Twinflo
Power 230V AV 50/60Hz
Motor Power 1200W
Airflow 40L/sec
Suction 2500mm
Capacity Dry 40L
Capacity Wet 32L
Cleaning Range 26.8m
Weight 22.5kg
Size 800x490x880mm

Small to medium size dual-motored ‘WV’vac. Construction, size and capacity as WV570-2 but with 2400W power giving 80L/sec airflow. A highly portable and rugged machine for commercial and light industrial use. Standard Kit-BB8, optional Kit-BB7.

Specifications
Motor 2xTwinflo
Power 230V AV 50/60Hz
Motor Power 2400W
Airflow 80L/sec
Suction 2500mm
Capacity Dry 23L
Capacity Wet 15L
Cleaning Range 26.8m
Weight 15.8kg
Size 415x415x645mm

Cleancare Range

Cleancare - WV570-2

Small – medium size wet & dry vac. with powerful 1200W two stage motor and super-tough Structofoam construction.(- with 3-year warranty ). Capacity: 15L-wet / 23L-dry. Larger 1½” (38mm) diameter tube set and accessories, altogether make this a rugged machine for commercial and light industrial use. Standard Kit-BB8, optional Kit-BB7.

Specifications
Motor Twinflo
Power 230V AV 50/60Hz
Motor Power 1200W
Airflow 40L/sec
Suction 2500mm
Capacity Dry 23L
Capacity Wet 15L
Cleaning Range 26.8m
Weight 13.6kg
Size 415x415x645mm

A medium size wet & dry vac with a large container giving capacities of 20 ltr wet and 27 ltr dry. A folding handle design allows easy movement when in use and compact storage
Supplied with standard aluminium Kit AA12

Specifications
Motor Twinflo
Power 230V AV 50/60Hz
Motor Power 1200W
Airflow 40L/sec
Suction 2500mm
Capacity Dry 27L
Capacity Wet 20L
Cleaning Range 26.8m
Weight 9.6kg
Size 358x450x710mm

Industrial Dry Vacs - NVQ570-22Kit BB2

Order codes
833282NVQ570-22 Red 240V + Kit BB2These were the first models designed and manufactured completely in Structofoam and they have proven themselves to be the complete answer to engineering integrity.

Structofoam is our unique material specification that has superb strength and impact resistance allowing machines to be truly rugged yet without a weight penalty.

Power and performance are to the full TwinFlo' standard with a choice of one or twomotored specifications. All models are equipped with dual 2-stage primary filter systems as standard, to which can be added giant HepaFlo dust bags if required.

The rugged Structofoam container is mounted on 4 x 75mm (3") non-marking, heavyduty castors and the compact size makes it ideal for numerous trades where it must frequently be moved from place to place such as builders, shop fitters, contractors etc.

The accessory kit is full 38mm (11/2") with stainless steel tube sets and even the 400mm (16") floor nozzle is a Structofoam design.

Commercial Dry Vacs - NVP370-2Kit NPH1

Order codes
834044NVP370-2 Grey 240V + Kit NPH1In the first instance the specification is to the highest standard... a full two-stage TwinFlo' motor providing superb long life performance; Tritex filtration; the Nucable 10-metre plugged cable system allowing easy replacement in the event of accidental damage... all in all a high performance, thoroughly practical design.

The unique caddy top makes sound common sense... somewhere for the cable and, during operation, somewhere for the small tools, a duster and perhaps
polish, always there when you need it.

The 15 litre container is fitted with a 4-wheel mobility system ensuring stability and skid free movement over all surfaces.

The accessory kit is everything that it should be but we have been extra thoughtful to the user, providing our microlight aluminium tube set and full size combination floor nozzle as standard.

Commercial Dry Vacs - NVP200-2Kit NPH1

Order codes
834047NVP200-2 Grey 240V + Kit NPH1In the first instance the specification is to the highest standard... a full two-stage TwinFlo' motor providing superb long life performance; Tritex filtration; the Nucable 10-metre plugged cable system allowing easy replacement in the event of accidental damage... all in all a high performance, thoroughly practical design.

The unique caddy top makes sound common sense... somewhere for the cable and, during operation, somewhere for the small tools, a duster and perhaps
polish, always there when you need it.

The 9 litre container is fitted with a 4-wheel mobility system ensuring stability and skid free movement over all surfaces.

The accessory kit is everything that it should be but we have been extra thoughtful to the user, providing our microlight aluminium tube set and full size combination floor nozzle as standard.

Commercial Dry Vacs - NVP180-2Kit NPH1

Order codes
834028NVP180-2 Grey 240V + Kit NPH1The NVP-180 is designed as the most compact model within our commercial range yet totally without compromise.

Full TwinFlo' professional power; Tritex filtration; 10-metre plugged replaceable cable; big 8 litre capacity, small in size, light in weight, but big in performance.

There is only one control... the On/Off switch... but once selected you will have power in abundance for continuous commercial operation.

The unique caddy top is simply brilliant and so practical, somewhere for the cable, your tools and even a duster and polish, right where you
need them, when you need them, each and every time.

Accessories are everything that is required to a professional standard, right down to the convenient microlight aluminium tube set and full size combination nozzle.

Commercial Dry Vacs - RSV200Kit A30A

Order codes
821616RSV200-1 Grey 240V + Kit A30AWhen it comes to congested environments there can be no doubt that the practical features of the RSV (Ruc Sac Vac) brings with it great advances in convenience cleaning, producing vastly improved results by virtue of the old adage "the right machine for the right job". In many countries Ruc Sac cleaning has become commonplace with substantial improvements in cost effective operation.

Particular attention has been paid to user comfort, convenience and safety with an ergonomically designed, comfortable harness system; lighter weight and lower noise levels.

The RSV's performance is excellent, with the extra large filter system and HepaFlo dust bags ensuring continuous operation and clean and easy emptying. The standard accessory kit incorporates all that is needed for quick and efficient cleaning of all surfaces

This versatile RSV (Ruc Sac Vac) has an 1100w motor, 6L capacity, large filter system and 2-stage Microflo disposable dust bags.

Industrial Dry Vacs - NVDQ900-2Kit CC5

Kit BB2

Order codes
833591NVDQ900-2 Red 240V + Kit BB2The 900 series sets an entirely new standard in design and construction of industrial vacuum cleaners, built by professionals to ensure high performance coupled with reliability and long service life.

The exciting use of Structofoam throughout this machine really makes it as strong as a truck, whilst its innovative design makes it every bit as easy to use as smaller machines.

Power and performance are to the full TwinFlo' specification and there is a choice of one or two-motored models with a dual 2-stage primary filter system as standard.

The rugged container is classic Structofoam engineering and the giant wheels and heavyduty castors provide excellent mobility and transit even in the most demanding applications.

The standard 38mm (1 1/2") accessory kit includes our extra long double swivel hose; stainless steel tubes; 400mm (16") Structofoam floor nozzle and additional useful accessories.

Commercial Dry Vacs - NRV200T-2Kit T20

Order codes
811016NRV200T-2 Red 240V + Kit T20The 200 series has all the many features of the Henry design with full professional TwinFlo' power and performance; Hi-Lo operation; Tritex filtration but with the addition of our extended commercial 12.5 metre cable rewind and storage system.

The 200T, TurboElectric, has its own unique 24 volt floating power brush system adjusting automatically to varying floor surfaces. The ideal choice for extensive carpet care.

Industrial Dry Vacs - NVQ900-22Kit CC5

Kit BB2

Order codes
833491NVQ900-22 Red 240V + Kit BB2The 900 series sets an entirely new standard in design and construction of industrial vacuum cleaners, built by professionals to ensure high performance coupled with reliability and long service life.

The exciting use of Structofoam throughout this machine really makes it as strong as a truck, whilst its innovative design makes it every bit as easy to use as smaller machines.

Power and performance are to the full TwinFlo' specification and there is a choice of one or two-motored models with a dual 2-stage primary filter system as standard.

The rugged container is classic Structofoam engineering and the giant wheels and heavyduty castors provide excellent mobility and transit even in the most demanding applications.

The standard 38mm (1 1/2") accessory kit includes our extra long double swivel hose; stainless steel tubes; 400mm (16") Structofoam floor nozzle and additional useful accessories.

Industrial Dry Vacs - NVDQ570-2Kit BB2

Order codes
833079NVDQ570-2 Red 240V + Kit BB2These were the first models designed and manufactured completely in Structofoam and they have proven themselves to be the complete answer to engineering integrity.

Structofoam is our unique material specification that has superb strength and impact resistance allowing machines to be truly rugged yet without a weight penalty.

Power and performance are to the full TwinFlo' standard with a choice of one or twomotored specifications. All models are equipped with dual 2-stage primary filter systems as standard, to which can be added giant HepaFlo dust bags if required.

The rugged Structofoam container is mounted on 4 x 75mm (3") non-marking, heavyduty castors and the compact size makes it ideal for numerous trades where it must frequently be moved from place to place such as builders, shop fitters, contractors etc.

The accessory kit is full 38mm (11/2") with stainless steel tube sets and even the 400mm (16") floor nozzle is a Structofoam design.

Small to medium size vac. with useful 15litre capacity. Larger version of the NRV200-22 with its 2-speed 1200W two stage motor. Standard Kit A1.
Motor Twinflo
Power 230V AV 50/60Hz
Motor Power 1200W
Airflow 45L/sec
Suction 2600mm
Capacity 15L
Cleaning Range 31.8m
Weight 7.5kg
Size 355x355x465mm

Smallest of the 'Q' (Quiet) machines. 9L container as the NRV200-22 model but with all-steel power head with patented Microtec noise reduction system. 1200W two stage motor with 2-speed hi/lo operation. Standard Kit-A1. The Quiet Vac. range is particularly suited to offices, schools, libraries, care homes, hospitals, etc.- in fact anywhere where a noisy appliance can be intrusive.

Commercial Dry Vacs - NRV200-22Kit NPH1

NRV200-22 Red 240V + Kit NPH1The 200 series has all the many features of the Henry design with full professional TwinFlo' power and performance; Hi-Lo operation; Tritex filtration but with the addition of our extended commercial 12.5 metre cable rewind and storage system

Code with stainless steel kit 841016
Code with aluminium kit 847016

Commercial Dry Vacs - NRV370-22Kit A1

Order codes
826516NRV370-22 Red 240V + Kit A1Professionals being exactly that, take the time to consider each and every feature of a machine in making their preferred choice and this decision-making is even more pronounced in the NRV-370 and 380 series which, by virtue of being 66% greater in capacity, will end up working longer hours... day in day out.

The NRV-370 is the big brother to the NRV-200 with the same superb TwinFlo' power and performance; Hi/Lo operation; 12.5-metre cable system, but with an additional 66% capacity... a full commercial standard.